How to build a mining rig 2020

Getting into BIOS is usually automatic, but if it doesn’t seem to be getting you there, press the DEL button whiles the PC boots.

Go to Settings – Power management and set your rig to automatically reboot in case of power outage.

Next, check the PCIE subsystem and set it to either gen 1 or gen 2. If the default is set to auto, that’s fine. Proceed to shut down your PC.

#6 Reboot the system using the USB stick you installed

First, load the OS and go to windows. Once on windows, proceed to the website of the motherboard you used.

Use a second computer to download all the relevant drivers that are available.

Install the drivers and run windows update to have the computer system up to date.

#7 Optimize windows

Disable superfetch.

How to build a mining rig 2020

If you are building a smaller rig, an old computer case will do.

However, you can also opt for commonly used items in the home like milk crates, wire racks or wooden frames.

Alternatively, you can go for one that is ready-made; though you’d need to be sure it will fit the rig you intend to build.

#2 Set up your motherboard

Place the motherboard on a flat non-static surface and carefully insert the CPU component into the socket.

Use thermal paste to have your custom cooler attached to the CPU. Learn how to correctly apply thermal paste to CPU or GPU if you’ve never done it before.

Make sure not to tamper with the CPU fan.
Connect this CPU fan to a 3-4 jack and then to the RAM.

Place the motherboard onto the rig frame and secure it into place using screws.

How to build a bitcoin mining rig 2020

GPU rigs in a cool area because they tend to overheat.

The GPU should have an optimal temperature to operate in.

Cooler rigs will have a better output which is our aim. So you should use AC, air duct boosters or oscillating fans to keep the room cool.

Graphics card

You will, of course, need a graphics card (or many of them) which is the main component that will be solving difficult mining problems.

We recommend Nvidia GeForce GTX 1070 because of its performance or AMD RX 480 for its low price and the fastest ROI.

Nvidia GeForce GTX 1070

High-end mining compatible graphics card

Get it on Amazon Now

Power supply

How much power do I need for my rig? That solely depends on the hardware used.

Since your graphics card will draw the most power, please refer to its manual to see the max power consumption.

This is done from the SATA cables. Just take the SATA power cables and line them next to each GPU position along the rig.

#4 Adding GPU risers

It is much easier to just have the USB and Molex cables installed into the RISER socket before attaching the GPU.

Secure your GPU to the rig frame before you proceed to connect the USB into the motherboard slot. Do this one riser at a time till all are done.

After you are done with the risers, connect all your PCIe cables to the GPUs.
Every Molex cable comes with at least 3 connecting cables, so you should be able to use 2 of the 3 connectors on 2 different GPU cards.

For instance, I am imagining you have chosen to go with 5 cards.

How to build a mining rig 20200

We recommend good-quality Corsair TX750M – three units will be more than enough for one rig ($120 each PSU). That’s true; many prefer some 1600-watt no-name Chinese “magic” PSU.
But it works, they say. We didn’t check though. Three TX750M units for 8 GPUs: you can easily connect any eight GPUs you want using cables included in Corsair’s package, plus you’ll end up having some extra power left.

Risers: $44—eight risers for one rig, $5.5 each. 006/007S risers are 100% working – have never let us down yet.

M2 to PCI Adapters: $9. You need two adapters for one rig, $4.5 each. They are made in China and are somewhat problematic.
Some batches can be okay while others, every second or third adapter is not working correctly.

Display emulator (HDMI to VGA Adapter): $7.

How to build a mining rig 202000

Recently, for a number of reasons, mining profitability has begun to decline. The increased difficulty of calculating the hash and reducing the reward for the mined block, practiced on most projects, makes miners doubt the feasibility of this initiative.

Though some beginners still want to start mining and build a rig just for fun.

What components are needed to build a mining rig and how to choose the right equipment? Freewallet tries to answer these questions in the text below.

Components for mining rig

For an effective mining process, the GPU rig should consist of the following components:

  • Motherboard – A powerful motherboard will be able to increase the life of the rig (ASRock, AFOX, Gigabyte, Asus).
  • Power Supply – Mining consumes a huge amount of electricity.

How to build a mining rig 202045

The process is no different from building a regular computer. The motherboard is placed on the bottom shelf of the frame, but it should not contact its surface.

  • Install the cooler and processor on the motherboard.
  • Mount the power supply to the corner of the frame.
  • Set the power button and indicators.
  • Connect a hard drive.
  • Connect video cards with raisers.
  • Inexpensive mining farm is almost ready.

    It remains only to install the operating system and download the software for the mining.

    How to choose components for the rig

    Motherboard

    A lot of beginners face the first problems already at the stage of choosing a motherboard. We recommend finding the board with 6 or 8 slots for video cards.

    Accordingly, not every motherboard’s bus will be enough to operate with so many video cards.

    The file should either come with the mining software or you have to create it manually.

    #10 Download and install overclocking software.

    Download the MSI Afterburner, SAPPHIRE TriXX or any other overclocking application.

    Use that to make adjustments to the GPUs core, voltage and memory. Aim at having low voltage use but high memory clocks for crypto like ETH.

    It is possible to lower the core clock when using one of the RX cards.

    When mining other cryptocurrencies, it is advisable to set the rig at low voltage use but high core clocks.

    For optimum output, tweak around with the settings until you get what’s best for you.

    *****

    The value of cryptocurrencies like Bitcoin and Ethereum has added to the attraction people have for them.

    Mining is one of the most profitable ways of getting the coins.

    Without it, you won’t be able to set a proper screen resolution in TeamViewer. This item is not required if you use Linux mining distro.

    Dual Power Supply Adapter: $20. Two adapters for one rig, $10 each. The ones we’ve chosen are with cables. You may also put in a paper clip – that’s free, or, if you use a powerful Chinese PSU (one for all your GPUs), you don’t need these adapters at all.

    Watchdog: $20 – WatchDog Pro 2. Fantastic electronic timer, which will reboot your rig if it gets stuck or if the Internet connection is not connecting.

    A total of $718 + GPUs.

    If you choose Nvidia 3060Ti, it will cost you at least $400 each so the total of 1 rig would be $3 918.

    Build an Ethereum Mining Rig Step by Step

    The Basics: First, attach CPU to motherboard, place the cooling fan and RAM.

    Connect SSD drive via SATA cable. Power it all with one PSU – it will be the primary unit. For now, mount just one GPU.

    BIOS: Launch your rig, go to BIOS and update it to the latest version, which is F4A at the moment. You can download it on the Gigabyte website. To install BIOS, put the file with the newest version to a USB flash drive. If BIOS update seems hard for you just skip this step. The motherboard should work well even with the factory firmware.

    After a successful BIOS update, you need to configure your motherboard for mining. Below you’ll see a screenshot with personalized settings by 2Miners – you’ll find them in advanced settings (F7).

    Windows: Install Windows 10 64bit, go for the default installation, disable whatever you don’t need.

    You could also consider buying a better CPU if you want to use it to mine CryptoNight for example together with GPU mining.

    Hard Drive:$20. We strongly recommend SSD. Faster boot time, higher operation speed – it’s excellent, so don’t skimp on it! We’d recommend 80GB SSD, just to make sure, but even with 60GB SSD, you are good to go.

    If you run some Linux mining distro like RaveOS any sized of SSD would meet your requirements.

    RAM:$17. DDR4 only. We usually use Kingston and hope for the best – has never let us down yet.

    One 4GB RAM-card would be enough – it’s not essential for mining. However, MTP algorithm usually requires more RAM. Please consider buying some more if you plan to mine Zcoin.

    Power supply units:$360.

    However, Windows or Mac OS are still great alternatives.

  • Accessories – monitor, keyboard, mouse and USB cables. They will be needed to set up a mining farm.
  • Frame to assemble all components, it will help to hold all the components of the rig.
  • Where should I buy the components

    In specialized stores, everything is simple: you can pick up the goods on the day of treatment, you do not need to wait for delivery. But the difference in price compared to Amazon can reach 100%. So, the GeForce 1050 Ti card in stores sells for $ 220-230, and on the Internet it can be purchased for $ 130. It is better to order accessories on Ebay or Amazon at an acceptable price and wait 20-25 days for delivery.

    Mining rig building steps

    1. Assemble the frame on which all equipment will be mounted.
    2. Assemble of components.

    Leave a Reply

    Your email address will not be published.